Category: Calculators

Tip Calculator

System ideaMissing a tool?

Work out the tip, the total and what each person owes

Enter the bill, pick or type a tip percentage and split it between people. See the tip, the total, what each person pays and the tip per person, with optional round-up.

Each person pays37.76
Tip11.52Total75.52Tip per person5.76People sharing2

Everything on this page is processed in your browser. Nothing is uploaded.

What this tool does

This tip calculator does the arithmetic you need in the thirty seconds after the bill lands on the table. There are three numeric fields — the bill amount, the tip percentage and the number of people — plus five preset buttons for 10, 15, 18, 20 and 25 that simply fill the percentage field, which stays editable so any other figure can be typed over them. The tip is the bill times the percentage and the total is the bill plus the tip. The headline figure is what each person pays; next to it you get the tip amount, the total including the tip, the tip each person is contributing, and the head count the split was actually calculated with. That last number is worth showing, because the head count is floored to a whole number and clamped to a minimum of one, so a blank, fractional or zero head count still divides by one person instead of failing. The round-up toggle raises the total to the next whole unit and turns the difference into extra tip. That is what rounding up at a table means: the bill itself is unchanged and the server receives the rounding — the tip is not rounded on its own, and neither is each person's share, which is where results from other calculators diverge from these. The bill, the percentage and the head count are validated as finite numbers, and neither the bill nor the percentage may be negative. Every amount is formatted by the browser's own number formatter in the page's language, always to two decimal places, and everything recalculates on every keystroke and every toggle, with no submit button. What it leaves out is just as deliberate. There is no currency selector and no symbol or code — the figures are plain numbers. There is no tax field, so the bill is taken exactly as entered and the tool takes no position on tipping the pre-tax or the post-tax amount; whichever number you type is the base. There is no guide to tipping customs by country, region, venue type or service type and no suggested rate for any of them, and no service-quality scale that picks a percentage on your behalf — the presets are quick fills, not recommendations. The split is even: every person pays the same share, with no per-person item assignment, no weighting and no 'this person had the wine' adjustment. Rounding applies to the total only — never down, never to the nearest unit, never to the tip alone, never to the per-person figure. There is no bill scanning, receipt photograph, OCR or itemisation; no currency conversion for a bill in another currency; no reverse solve, so a percentage cannot be recovered from a chosen total or per-person figure; no staff-side tip pooling by hours or points, which is a different job entirely; and no copy button, saved bill, share link or download. The bill amount, the percentage and the head count are entered and used only in the browser. The arithmetic ships with the page, so nothing is uploaded and nothing is remembered between visits.

How to use it

  1. Enter the bill amount, then tap a preset percentage or type the rate you want to leave.
  2. Enter the number of people, and switch on round-up if you want the total taken to the next whole unit with the difference added to the tip.
  3. Read what each person pays, along with the tip, the total with tip, the tip per person and the head count used.

Privacy

This tool runs entirely in your browser. Your input is never uploaded, stored or shared — closing the tab removes it.

Frequently asked questions

How do you calculate a 20% tip?
Multiply the bill by 0.2, then add it back: a bill of 60 gives a 12 tip and a 72 total. Here you type the bill and either tap the 20 preset or type any rate, and the tip, the total and the per-person figures update as you type, with no submit button.
How do you split a bill and its tip between people?
The tipped total is divided evenly, so each person pays (bill + tip) ÷ head count, and the tool also shows the tip each person is contributing. The head count is floored to a whole number and never drops below one, so a blank or zero entry still divides by one, and the count used is displayed with the result.
What does the round-up toggle do?
It rounds the total up to the next whole unit and gives the difference to the tip, leaving the bill amount untouched. It is the table total that moves — not the tip on its own and not each person's share, which is how some other calculators round and why their figures can differ from these.
Should I tip before or after tax?
The tool does not decide that for you and has no tax field: it multiplies the bill you type by the percentage you type. Enter the pre-tax amount if you want to tip on that, or the post-tax amount if you prefer — the base is whichever figure you put in the bill field.
Can it suggest a rate, split unevenly or scan the receipt?
No to all three. There is no tipping guide by country or venue and no suggested rate — the presets only fill the percentage field. The split is even, with no itemised or weighted shares, and there is no receipt scanning, currency conversion or reverse solve from a chosen total.